GOtv automatic scanning problem, causes and how to fix

GOtv automatic scanning problem – In this article, we will discuss the causes of GOtv automatic scanning problems and how to fix them.Information Guide Nigeria

GOtv is a popular digital television service provider in Africa, known for its affordable packages and diverse range of channels.

Automatic scanning on GOtv can be helpful in finding new channels or refreshing the channel list. However, users have reported facing automatic scanning problems on their GOtv decoders. This issue can be frustrating for users as it disrupts their viewing experience. This can also be an inconvenience, especially if it happens frequently.GOtv automatic scanning problem

Read Also: Which GOTV channel shows champions league 

Causes of GOtv Automatic Scanning Problems:

1. Poor Signal Strength: Poor signal strength is one of the most common causes of GOtv automatic scanning problems. If the signal strength is low, the decoder may struggle to find available channels and may automatically initiate a scanning process.
2. Incorrect Antenna Placement: The placement of your antenna plays a significant role in the quality of your signal reception. If your antenna is not correctly placed or is facing the wrong direction, you may experience automatic scanning problems.
3. Technical Faults: Technical faults such as faulty cables, damaged decoders, or weak batteries in your remote control can also cause automatic scanning problems.

Read Also: Nigerian Idol Channel on DSTV – What channel is Nigerian idol on GOTV

How to stop automatic scanning on GOtv

Here are the steps you can follow to stop automatic scanning on your GOtv decoder:

1. Press the “Menu” button on your GOtv remote control.
2. Select “Advanced Options” and press the “OK” button.
3. Select “Installation” and press the “OK” button.
4. Enter your PIN if prompted. The default PIN is 1234.
5. Select “Automatic Scan” and press the “OK” button.
6. Select “Off” and press the “OK” button.
7. Press the “Exit” button to exit the menu.Professional Practice In Urban and Regional Planning

Once you have turned off automatic scanning, your GOtv decoder will not initiate a scanning process automatically. If you want to scan for new channels or update your channel list manually, you can do so by following the same steps and selecting “Manual Scan” instead of “Automatic Scan.”NYSC Portal

Read Also: How Do I Restore My GOTV Signal

How to Fix GOtv Automatic Scanning Problems:

1. Check Signal Strength: Check the signal strength on your GOtv decoder. If the signal strength is low, adjust the position of your antenna to improve the signal quality. You can also contact a professional installer to help you optimize your antenna’s placement.
2. Check Antenna Placement: Ensure that your antenna is correctly placed and facing the right direction. This will ensure that the signal reception is optimal and reduce the likelihood of automatic scanning problems.
3. Reset your decoder: Resetting your GOtv decoder can help to fix technical faults that may be causing automatic scanning problems. To reset your decoder, unplug it from the power source, wait for 30 seconds, and then plug it back in. You can also press the reset button on your decoder.
4. Contact GOtv Support: If you have tried all the above solutions and are still experiencing automatic scanning problems, you can contact GOtv support for assistance. Their technicians will be able to guide you on how to fix the problem.JAMB Result

Read Also: GOtv Account Balance – How to Check GOtv Balance

In conclusion, automatic scanning problems on GOtv decoders can be frustrating, but they are fixable. By checking your signal strength, antenna placement, resetting your decoder, and contacting GOtv support, you can fix this problem and enjoy uninterrupted viewing on your GOtv decoder.

Check JAMB Result

Check and Confirm: How much is Dollar to Naira

📢 We are hiring writers!