👉 Relocate to Canada Today!

Live, Study and Work in Canada. No Payment is Required! Hurry Now click here to Apply >> Immigrate to Canada


WAEC Syllabus for Basic Electricity/ Applied Electricity

WAEC Syllabus for Basic Electricity/ Applied Electricity. WAEC Syllabus for Basic Electricity/ Applied Electricity is available for all candidates who wants to participate in the examination. The West African examination council (WAEC) has officially introduced a syllabus that will guide all the WAEC candidates who wish to write the WAEC examination this year. For a very successful WAEC Basic Electricity/ Applied Electricity examination for this year, you need to check out the available areas of concentration. It has been divided into sections with chapters, followed by the topics covered. Inside the below WAEC Basic Electricity/ Applied Electricity syllabus, you will also see the format of how the WAEC Basic Electricity/ Applied Electricity questions will look like. Jamb form 

There are always 3 sections to answer questions from. Paper 1 to 3 contains multiple essay questions. Where paper one (1) carries 1 hour for 50 marks; paper two (2) 1 hour and carry 50 marks while paper three (3) carries 3 hours for 100 marks.

👉 Relocate to Canada Today!

Live, Study and Work in Canada. No Payment is Required! Hurry Now click here to Apply >> Immigrate to Canada

 WAEC Syllabus for Basic Electricity/ Applied Electricity

This WAEC syllabus is for both the O’level WAEC and General Certificate Examination (GCE) candidates. Final year students in the senior secondary school level and external candidates are eligible to make use of this syllabus and prepare ahead of the examination.

See the full detailed information concerning the WAEC Basic Electricity/ Applied Electricity Syllabus below. Pounds to Naira


This examination syllabus has been evolved from the Senior Secondary School Electricity curriculum. It is designed to test candidates’ knowledge and understanding of electrical and electronic principles, maintenance and repair of domestic and industrial equipment and safe working procedures. The examination syllabus does not replace the curriculum.


The objective of the syllabus is to test candidates’:

  • knowledge and understanding of the basic concepts and principles of Basic Electricity/Applied Electricity; WAEC Syllabus for Basic Electricity/ Applied Electricity
  • ability to use tools and equipment in the maintenance and repair of electrical/electronic devices;
  • understanding of the principle of operation and the application of simple electrical/electronic devices;
  • understanding of safe working procedures and safety precautions in domestic and industrial installation.


There will be three papers, Papers 1, 2 and 3 all of which must be taken. Papers 1 and 2 will be a composite paper to be taken at one sitting. Jamb Result

PAPER 1:      will consist of fifty multiple-choice objective questions to be answered in 1 hour for 50 marks.

PAPER 2:      will consist of three sections: Sections A, B and C as follows:

👉 Relocate to Canada Today!

Live, Study and Work in Canada. No Payment is Required! Hurry Now click here to Apply >> Immigrate to Canada

Section A will be compulsory for all candidates.  It will consist of four questions out of which candidates will be required to answer any three.

Section B will be for candidates in Ghana only. It will consist of three questions out of which candidates will be required to answer two. Dollar to Naira Rate

 Section C will be for candidates in Nigeria, Sierra Leone and The Gambia only.   It will also consist of three questions out of which candidates will be required to answer two.

Thus, candidates will be required to answer five questions in all. The paper will last 1 hour and carry 50 marks. Npower Recruitment

PAPER  3:     will be a practical paper of two experiments both of which are to be carried out by candidates in 3 hours for 100 marks. Waec Result



(For all candidates)



Structure of matter






Conductors and insulators.

Ohm’s law and Kirchhoff’s laws

Power  and energy



Fundamentals of magnetism





Concept of Electric field



















Electromagnetic field











Self and Mutual Induction









Moving-coil instrument





Moving-iron instrument



Digital instrument




Binary number



Logic gates









Generation of e.m.f. in a single turn coil


A.C. quantities




RLC circuits








Types of transformer



Principles of operation of a transformer


Losses and temperature rise in transformers



Efficiency of transformers


Cooling of transformers




Power supply units









A.C. motors (Single phase)









A.C. motors (Three phase)





D.C. generators



D.C. motors





Generating station






Electrical installation






















Maintenance, Fault diagnosis and Repairs






Testing of an installation



General Workshop Safety







Qualitative treatment of the structure of atoms in relation to electric current.

Types of resistors.

Resistor colour code.

Resistors in series and parallel.

Power rating of resistors.

Definition, examples and characteristics.

Qualitative treatments only.

Treatment should include calculations.




Types of magnet.

Magnetic properties of materials: magnetic flux, magnetic flux density, permeability, magnetomotive force and reluctance.


Electric field and properties: electric flux, electric flux density, electric field strength, permittivity and dielectric constant, potential gradient.


Comparison between magnetic and electric circuits


Types of capacitor.

Capacitance and dielectric.

Charge on capacitor, relationship between charge and applied voltage of a capacitor.

Application of capacitors.

Voltage rating.

Series and parallel connection.

Energy stored in a capacitor

(E =  QV= CV2): simple calculations.




Magnetic field around a current-carrying conductor.

Fleming’s Right Hand Rule

Force on a current-carrying conductor in a magnetic field (F = BILsin).


Lenz’s law and Faradays law.

Emf induced in a coil (E = BLVsin)

Simple calculations involving force and

e.m.f. only.



Qualitative treatment of self and mutual induction.

Energy stored in a coil (E =  LI2).

Application of electromagnetism as found in electric bell, security alarm system, solenoid, loudspeaker, buzzer, moving-coil instruments etc.



Construction, advantages and disadvantages.

Conversion of moving-coil instrument to ammeter and voltmeter.

Calculations of shunts and multipliers.



Construction, principles of  operation, advantages and disadvantages.


Multimeter, voltmeter, ammeter etc.

Advantages and disadvantages.




Conversion of decimal numbers to binary numbers and vice versa.


Series connection of switches – AND

gate, parallel connection of switches – OR gate and inverter – NOT gate.

Truth table for logic gates.

General symbols for AND, OR, NOT, NAND and NOR gates.

Boolean expression.





Plotting of labelled sinusoidal waveform for a complete cycle.


A.C quantities (r.m.s., peak and average values, form factor, cycle, period and frequency)


Solution of problems involving RL, RC and RLC series circuits.


Conditions for resonance.

Phasor diagram of series resonance.


Transformer construction


Type based on (i) construction (shell and core) and (ii) function (current and voltage).


Operation and transformation ratio



Transformer losses (copper and iron)

Effect of losses and temperature rise in a transformer. Qualitative treatment only.


Losses and efficiency of transformer


Methods of cooling.

Need for cooling.



Power supply units: dry cell, solar cell, cadium cell and accumulator.

Block diagram of d.c. power supply.

Functions of blocks of power supply.


Half-wave and full-wave rectifications.

Filtration and stabilization.



Types of single phase motor: split-phase, capacitor-start, capacitor-run.

Application of single-phase motors.


Principles of operation, parts and types.

Relationship of speed, number of poles and frequency

f =  (Hz)


Principles of operation, parts, type and application

Methods of starting: direct-on-line, star delta and auto transformer.



Principles of operation, parts and methods of

connecting field windings.


Principles of operation, parts, types (shunt, compound, series) and application.




Methods of generating electrical power: diesel engine, steam engine, hydro-electric, nuclear, gas turbine.




Types of wiring: surface, conduit, trunking, ducting.

Selection of materials, tools and accessories.

Application of IEE wiring regulation regarding domestic installation.



Cables and accessories.

Current-carrying capacity of cable.

Wiring of lighting and socket outlets and connection of plugs.

Conduit, surface, trunking and ducting installations.


Protective devices

Fuses and circuit breakers

Discrimination of protective devices


Reasons for earthing.

Methods of earthing.

Earth loop impedance.


Types of fault: short circuit, open circuit and earth leakage.

Methods of diagnosing and repair of faults in an installation and equipment such as

fluorescent fitting, electric iron, electric fan, blender etc.


Continuity test, insulation resistance test, earth leakage test and polarity test.


Application of electrical safety regulations.






(For candidates in Ghana only)



Electron emission




Thermionic emission



Cathode Ray Tube(CRT)





































Electromagnetic waves














Operational amplifiers






Methods of emitting electrons: Thermionic emission, photo emission, secondary emission and field emission.


Functions of electrodes, parameters and application.


Functions of electrodes in CRT.




Properties of semiconductor materials. Differences between n-type and p-type semiconductor materials.


Circuit symbol.

PN junction diode.

Barrier potential.

Forward and reverse bias for a pn junction diode.

Characteristics of a pn diode.

Application of pn junction diode.


Bipolar transistor: two pn junction devices (npn and pnp).

Configuration of bipolar transistor: CC, CB and CE.

Principles of operation and mode of connection of the three configurations of a transistor.

Characteristics of an npn transistor (common emitter).

Unipolar transistor: p-channel and n-channel of field effect transistor (JFET).

Principles of operation of JFET.

Semiconductor devices and their application: diac, triac, SCR, LED and zener diode.

Application of a photo transistor

Integrated circuits: simple integrated circuits and their uses.





Characteristics of radio waves.


Amplitude and frequency modulation and their waveforms.




Advantages of frequency modulation (F.M.) over amplitude modulation (A.M.).


Classifications: class A, class B, class AB and class C.

Application and efficiency of an amplifier.


Properties and construction of an ideal operational amplifier.

Inverting and non-inverting op-amp.



(For candidates in Nigeria, Sierra Leone and The Gambia)


























Maintenance and repair of electrical appliances





Layout diagram of high voltage overhead transmission system.

Treatment of main components (towers, insulators and conductors) and functions. Detailed treatment of components not required.

Operating voltage levels for transmission lines (132 kV and 330 kV) and the need for high voltage system should be emphasized.


Layout diagram and main components of electricity distribution.

Functions of substation components (transformers, feeders etc.)









Types (predictive, preventive and corrective)


Common faults that occur in electrical appliances (blender, electric iron, electric kettle, toaster, fluorescent lamps etc) such as short circuit, open circuit, earth fault etc.


Check and Confirm: How much is Dollar to Naira               Pounds to Naira Rate Today

📢 We are hiring writers!

Article Writing Jobs - We are hiring good freelance writers - Click here to apply

Copyright Warning!

Contents on this website may not be republished, reproduced, or redistributed either in whole or in part without due permission or acknowledgment. . Proper acknowledgment includes, but not limited to (a) LINK BACK TO THE ARTICLE in the case of re-publication on online media, (b) Proper referencing in the case of usage in research, magazine, brochure, or academic purposes,. . All contents are protected by the Digital Millennium Copyright Act 1996 (DMCA). . . The images, except where otherwise indicated, are taken directly from the web, if some images were inserted by mistake violating the copyright, please contact the administrator for immediate removal.
. We publish all content with good intentions. If you own this content & believe your copyright was violated or infringed, please contact us  for immediate removal.

Infoguide Editor

InfoGuide Nigeria is a team of Resource Persons and Consultants led by Ifiokobong Ibanga. Page maintained by Ifiokobong Ibanga. If you need a personal assistance on this topic, kindly contact us.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button

It looks like you're using an ad blocker!

This website InfoGuideNigeria.com is maintained by the advertising revenue and we noticed you have ad-blocking enabled. Please disable Ad-Blocker